Engineering plastics in sheets, rods and cut-to-size blanks for machining, fixtures, machine parts and electrical equipment. We help select the right material by load, temperature, chemical environment and insulation needs.
POM (Acetal)
Stiff, low-friction, dimensionally stable – the go-to material for gears, bushings and machine parts.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.41 |
| Tensile strength (MPa) | ≈ 65 |
| Service temperature (°C) | −40 … +100 |
| Colors | White, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
MC Nylon (cast PA6)
Cast nylon with high wear and impact resistance – replaces metal in wheels, pulleys and guides.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.15 |
| Tensile strength (MPa) | ≈ 80 |
| Service temperature (°C) | −40 … +105 |
| Colors | Blue, ivory, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
Phenolic Bakelite
Insulating, heat resistant and rigid – for jigs, insulating plates, soldering fixtures and work surfaces.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.35 |
| Tensile strength (MPa) | ≈ 100 |
| Service temperature (°C) | … +120 |
| Colors | Orange, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PEEK
High-performance plastic: 250 °C service, high strength, chemical resistance – semiconductor, medical, aerospace.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.32 |
| Tensile strength (MPa) | ≈ 100 |
| Service temperature (°C) | … +250 |
| Colors | Natural beige, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PTFE
Almost completely chemically inert, very low friction, high heat resistance – seals, gaskets, non-stick linings.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 2.18 |
| Tensile strength (MPa) | ≈ 25 |
| Service temperature (°C) | −200 … +260 |
| Colors | White |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PU (Polyurethane)
Elastic, abrasion resistant and shock absorbing – wheel and roller coverings, bumpers.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.20 |
| Tensile strength (MPa) | Shore A 70 – 95 |
| Service temperature (°C) | −30 … +80 |
| Colors | Amber, red, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PP (Polypropylene)
Light, acid and alkali resistant, weldable – chemical tanks, linings, water treatment equipment.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 0.91 |
| Tensile strength (MPa) | ≈ 32 |
| Service temperature (°C) | 0 … +100 |
| Colors | White, grey |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PA (Polyamide)
Extruded nylon – tough, wear resistant, economical – sliding parts, gears, light-duty rollers.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.14 |
| Tensile strength (MPa) | ≈ 75 |
| Service temperature (°C) | −40 … +100 |
| Colors | Ivory, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PVC
Chemical resistant, easy to machine and weld – partitions, ducts, tanks, cabinets.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.40 |
| Tensile strength (MPa) | ≈ 50 |
| Service temperature (°C) | 0 … +60 |
| Colors | Grey, white, clear |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
PC (Polycarbonate)
Transparent with very high impact strength – machine guards, protective windows, housings.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.20 |
| Tensile strength (MPa) | ≈ 65 |
| Service temperature (°C) | −40 … +120 |
| Colors | Clear, opal |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
ABS
Rigid with a good surface finish, easy to machine and bond – housings, light jigs, prototypes.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.05 |
| Tensile strength (MPa) | ≈ 40 |
| Service temperature (°C) | −20 … +80 |
| Colors | Ivory, black |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
HDPE / UHMW-PE
Very slippery, wear and impact resistant, non-absorbent – conveyor guide rails, chute liners.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 0.95 |
| Tensile strength (MPa) | ≈ 25 |
| Service temperature (°C) | −100 … +80 |
| Colors | White, black, green |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
Acrylic (PMMA)
Glass-clear, light, easy to cut and engrave – covers, display boxes, inspection windows.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.19 |
| Tensile strength (MPa) | ≈ 70 |
| Service temperature (°C) | −40 … +80 |
| Colors | Clear, many colors |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
ULTEM (PEI)
170 °C service, insulating, strong, flame retardant – semiconductor fixtures, electrical parts.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.27 |
| Tensile strength (MPa) | ≈ 105 |
| Service temperature (°C) | … +170 |
| Colors | Amber |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
Anti-static (ESD) materials
Anti-static POM, PC, PVC and PEEK – jigs, trays and covers in electronics plants.
| Parameter | Value |
|---|---|
| Density (g/cm³) | By base material |
| Tensile strength (MPa) | By base material |
| Service temperature (°C) | By base material |
| Special property | Surface resistivity 10⁶ – 10⁹ Ω |
| Colors | Black, grey, clear |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
Insulation materials (FR4, G10, mica)
FR4/G10 epoxy glass laminates and mica sheets – switchgear, transformers, soldering jigs.
| Parameter | Value |
|---|---|
| Density (g/cm³) | 1.85 |
| Tensile strength (MPa) | ≈ 300 |
| Service temperature (°C) | … +130 |
| Special property | Dielectric strength ≈ 20 kV/mm |
| Colors | Light green, yellow |
| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
Typical material values for reference only. Unit: mm.
Quote this item →
Plastic welding rods
PP, PVC, PE and PVDF rods matched to the sheets – for welding tanks, ducts and plastic structures.
| Parameter | Value |
|---|---|
| Density (g/cm³) | By material |
| Tensile strength (MPa) | — |
| Service temperature (°C) | By material |
| Special property | Round Ø3 – Ø5 mm, triangular |
| Colors | Matched to sheet color |
| Forms | Coils or sticks |
Typical material values for reference only. Unit: mm.
Quote this item →| Forms | Sheets 1 – 150 mm thick · rods Ø6 – Ø300 mm (by material) · cut to size |
|---|---|
| Processing | Sheet and rod cutting to size; CNC machining to drawing |
| Documents | CO, CQ, material data sheet (on request) |
Yes. Send dimensions and quantities; we supply cut blanks or finished machined parts to drawing.
POM is more dimensionally stable and slippery for precision parts; MC Nylon handles impact and wear better for large loaded parts. We advise based on operating conditions.
Yes: PEEK, ULTEM, PTFE and anti-static (ESD) plastics for jigs and trays in semiconductor environments.
Send part numbers, quantities or drawings. We will get back to you to clarify specs and propose the right solution.
